Alarm Relays Units

Control interface and alarm relay units

LGRU16 and LGRU16ELR control interface relay units

LGRU16 and LGRU16ELR control interface relay units provide physical alarm and tamper outputs for DVR and Alarm systems.

Between one and four LGRU16 relay units can be connected with a single masthead receiver to provide the maximum of 64 alarm and 64 tamper contacts.

The LGRU16 is supplied with one LGRM8 relay module which provides 8 alarm and 8 tamper relay contacts that can be interfaced to virtually any alarm system. A further LGRM8 module can be added to increase it to 16 alarm and 16 tamper outputs.

The LGRU16ELR version has screw terminals and End Of Line Resistors built in. The resistor values are plug-in modules and may be changed according to the alarm type (see list). On the front panel, a display shows information on alarms faults and tampers, which are held in the log. The PIR’s call in periodically and are monitored individually. If they fail to call in, an alert is raised. An additional RS232 output enables a PC to be connected and the FREE MH Manager software can be used to analyse the wireless system.

Downloads

LGRU16 & LGRU16ELR

Control interface and alarm relay units

Download
Luminite Range

Luminite short product guide

Download